Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain Silicone Tubing, Platinum-Cured, 3/8 in ID, 5/8 in OD
Saint-Gobain Sani-Tech STHT-C platinum-cured silicone tubing, 3/8 in ID x 5/8 in OD, is an ultra-pure, biopharmaceutical-grade tubing suitable for repeated autoclaving and sanitary fluid transfer.
- Platinum-cured silicone construction.
- Inner diameter 3/8 in (0.375 in / 9.53 mm).
- Outer diameter 5/8 in (0.625 in / 15.88 mm).
- Wall thickness 1/8 in (0.125 in / 3.18 mm).
- Hardness 50 Shore A.
- Burst pressure approximately 40.4 psi for this size.
- Withstands autoclaving; suitable for biopharmaceutical and laboratory fluid transfer.
- Color striping available for fluid-path identification.
AVANTOR MASTERFLEX (VWR LLC) Catalyst Stopped Tubing Assembly, Norprene Food, 1.6 mm ID, 12 pk
Start pumping with little effort - preconfigured Links for quick and easy setup
ATCC Quantitative Genomic RNA from Enterovirus D68 (strain US/MO/14-18947)
Quantitative Genomic RNA from Enterovirus D68 strain US/MO/14-18947 provides a quantified molecular standard for development, verification, and validation of nucleic-acid-based assays. Use it to generate qPCR standard curves, monitor assay performance, and assess lot-to-lot consistency. For research use only; not for diagnostic or therapeutic applications.
- Product type: molecular standard (genomic RNA).
- Organism/strain: Enterovirus D68 strain US/MO/14-18947.
- Format: frozen; volume 100 μL.
- Concentration: ≥1 x 10^5 copies/μL.
- Storage: -70°C or colder.
- Intended use: research use only.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured Silicone, 3/16"" ID x 7/16"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications. Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -60 to 460¿F (-51 to 238¿C) Sterilize: Autoclave or gamma irradiation.
Grainger Corrugated Tubing PE 3/4 in 100 ft
The 3/4" Corrugated Loom Tubing from Grainger is flexible, split, and corrugated to protect wires, cables, and hoses. Made from polyethylene, it operates between -20°F and 176°F. With a 3/4" inside diameter, it is sold by the foot in lengths from 25' to 1000' and can be cut as needed. The design allows bending for routing and is suitable for indoor and outdoor use, protecting against abrasion, moisture, and chemicals. The split design enables easy insertion of wires and cables without disconnecting fittings, ideal for various protection applications.
Grainger Corrugated Tubing Nylon 1/4 in 25 ft
The Grainger split corrugated loom tubing is a flexible plastic tubing used to bundle and protect wires and cables. It features a split down one side that allows for easy wire insertion without disconnecting. The tubing has a corrugated design which allows it to flex while still protecting contents. It is made from polyethylene and comes in sizes ranging from 1/4 inch to 2 inches in diameter. The tubing is UL recognized and rated for temperatures between -20°F to 176°F. It can be cut to desired lengths during installation. Overall, the split loom tubing is an easy to use option for bundling and protecting wires and cables.
Grainger Corrugated Tubing PE 1/4 in 25 ft
The Grainger 16Y250 is a Westward brand 1/4-inch drive socket set. It contains both SAE and metric sockets ranging from 4mm to 15mm and 1/8 inch to 9/16 inch. The set has a total of 38 pieces and comes in a plastic organizer case for storage and portability. The sockets are made from chrome vanadium steel for durability and have a matte finish to prevent corrosion. This socket set is ideal for automotive and light industrial applications.
Chemglass Life Sciences Cajon Flexible Tubing Only, 3/8" Size X 6" Length, Airfree, Schlenk
Cajon Flexible Tubing Only, 3/8" Size X 6" Length, Airfree, Schlenk. Cajon Stainless Steel #321 Flexible Tubing is compressible by at least 20%, and extendable by 50% of its nominal listed length. The 1/4" and 3/8" sizes have a cuff length of 0.75" while the 1" size cuff length is 1".PLEASE NOTE: SINCE FLEXIBLE TUBING WILL CONTRACT WHEN EVACUATED, GLASS APPARATUS SHOULD NOT BE FIRMLY CLAMPED IN PLACE UNTIL VACUUM IS ESTABLISHED WITHIN THE SYSTEM
Med Vet International Urethral Catheter McKesson Straight Tip Uncoated PVC 14 Fr 6 Inch 16-F614 30/Box
Urethral Catheter McKesson Straight Tip Uncoated PVC 14 Fr 6 Inch 16-F614 30/Box
Microsolv Technology Corporation Tubing, PTFE, 1.70" ID, 2mm OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv, Thin Walled, PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 1.70mmPressure rating: 150 psi.
Microsolv Technology Corporation Tubing Holder, Knee, 180 Degree Turn. Blue. 10/PK.
This Tubing Holder, will keep your tubing "in place" when making a 180⁰ turn, which is not always easy. Avoid clutter and keep your system optimized. These tubing knees will give you the right bend of your PEEK tubing, preventing close diameters, which do have a negative effect on the mechanical stability of your PEEK tubing and can cause poor internal dimensions.Best performance when used with 1/16th" PEEK Tubing but other tubing can be used as well.